NEWS
 
Basic knowledge of the electric drill
Author:admin Time:2014/6/30 16:49:09 From:web 

 Using electric power drilling tools. Is the normal product in electric tool, is one of the biggest power tools of demand for products. Number of annual production and sales accounted for 35% of China's electric tools. Electric drill main specifications are 4, 6, 8, 10, 13, 16, 19, 23, 32, 38, 49 mm, number refers to the tensile strength of 390 n/was steel drill bit diameter. For non-ferrous metals, plastic materials such as hole diameter than the original specifications largest 30 ~ 50%.

The working principle of

Working principle of the electric drill is electromagnetic rotary motor or electromagnetic reciprocating small capacity of motor rotor magnetic field cutting power operation, through the drive mechanism drive operation device, driving gear increase the power of the drill bit, so that the drill bit scraping surface, better into the object.

A brief history of

The birth of the global power tool is from electric drill products - in 1895, Germany developed the world's first direct current drill, the drill machine 14 kg weight, shell made from cast iron, can only in 4 mm steel plate with a hole. Then the three-phase power frequency (50 hz) drill, but the motor speed can't exceed 3000 r/min.

In 1914, a single-phase series motor drive electric drill, electric motor speeds above 10000 r/min.

Appeared in 1927, the power supply frequency is 150 ~ 200 hz frequency electric drill, it not only has the advantage of high single-phase series motor rotation speed, but also has the advantages of simple structure, reliable three-phase power frequency motor, but because of the need medium frequency power supply, current use is restricted.

In the '60 s, appeared with nickel cadmium battery power battery electric drill without the power cord. To the mid and late 70 s, due to price battery, charging time is shortened, the electric drill is widely used in Europe and the United States, Japan.

After the electric drill was originally cast iron shell, use aluminum alloy shell. In the '60 s, thermoplastic engineering plastics used in electric drill, and double insulation and implements the electric drill.

Electronic speed drills emerged in the 60 s. This drill using thyristor element composition and so on electronic circuit, switch to press the button is pressed into the depth of the different to adjust speed, so that the electric drill in the use of object can be processed according to the different (such as the material is different, the hole diameter size, etc.), choose a different speed.

classification

A drill can be divided into three categories: hand electric drill, impact drill, hammer drill.

Minimum 1, hand electric drill: power, use scope is limited to wood drilling and when an electric screwdriver, do not have much practical value.

2, impact drill, impact drill impact mechanism have fangs and ball type two kinds.

Ball type impact electric drill by the moving plate, plate, steel ball, etc. Dynamic plate through threads are connected to the spindle, with 12 steel ball; Fixing use pin fixed on the chassis, with 4 ball, under the influence of thrust, 12 steel ball along the four steel ball rolling, the carbide drill rotating impact movement, can on the brittle materials such as brick, block, concrete drilling. Release pin, make the fixing servo plate rotation, no impact, to make a general electric drill.

3, hammer drill, electric hammer: can drill holes on any of the material, the most widely use scope.

Three drill price from low to high alignment, function also is more, need to combine their respective applicable scope and requirements.


  Related News
  • CONTACT
  • Contact Person:Miss Liang Li
  • Tel:+86-0577-65152688
  • Mobile telephone:13758409622
  • Fax:+86-0577-65155958
  • Add:No.685.Ruian Economic Development Zone, Zhejiang,China Contact Person: Ms Liang
Copyright© Lida Electromechanic Co., Ltd All Rights Reserved. 浙ICP备12010378号-1  Technical Support:lianke.cn